All Categories
    Filters
    Preferences
    Search Results

    PROVALE Regulating Drinking Cups

    The Provale® Cup is a Limited Flow Cup for the delivery of thin liquids. Simply by tipping the Provale® Cup in a normal drinking motion, the cup delivers Small Sips™ (5cc, one teaspoon, or 10cc two teaspoons depending on Cup model). By returning the Cup to its upright position, the chamber is refilled and ready to deliver another Small Swallow®. This repetitive, normal drinking motion encourages normal drinking habits and may allow for more patient independence. Replacement lids sold individually.
    *
    *

    Features

    • For thin liquids only.
    • Fixed delivery amount of 5cc/ blue (1 tsp) or 10cc/ brown(2 tsp) with every normal drinking motion.
    • Each cup holds 8 fl oz
    • Patented mechanism helps prevent fluid over-delivery.
    • Broad base to minimize tipping and spilling.
    • Designed to utilize normal drinking motion.
    • Easy and logical assembly and disassembly.
    • Easy-to-clean and institutional dishwasher-safe 

    The Provale® Cup delivers a fixed amount of thin liquids with every normal drinking motion. The design encourages normal drinking motion, may assist in patient re-training and potentially more patient/resident independence and helps assure patient compliance to drink Small Swallows®.

    Quality

    • The Cup is manufactured in an ISO/GMP FDA registered facility, meets strict quality control standards and has a registered CE Mark.

    Designed to look similar to a "travel mug"

    • This design maintains patient/resident dignity and can be used in the clinical, home or outdoor setting.

    Designed with Safety in mind

    • The Cups are color coded for safety to help insure correct fluid delivery – 5cc or 10cc.
    • The Cups have a patented "anti suck" design to help prevent potential over delivery.
    • The Cups have accurate delivery (5cc or 10cc) within specification.
    • The Cup handles snap in place for security and are not to be detached after assembled.
    • The handles are designed with a large surface area for easy patient grip.
    • The Cup has a broad round base, not easy to tip over.

    Ease of Handling

    • The Cup assembly consists of three pieces that snap together and can only be assembled one way.
    • Cups can be disassembled and washed, like other food service items, in an industrial washer
      (no valves, nipples, etc. that needs special hand washing).

    Clinical Benefit

    Delivers a fixed amount of fluid which could potentially improve:

    • Patient compliance regarding Small Swallows® of fluid.
    • Improved overall patient hydration.
    • Patient independence and safety by delivering a fixed amount of fluid and anti suck feature.
    • Relearning to drink utilizing a normal drinking motion.
    • Good nose clearance and an angled channel which allows proper chin position.

    Provale® Cup Easy Assembly

    The Provale® Cup is designed as a cup within a cup and easiliy assembles.

    Attaching Handles

    • Choose how many handles are to be attached.
    • The cup can be used with one handle or both handles.
    • Once this choice is made, slide each handle into one of the grooves on the side of the outer cup.
    • Once in the groove, push the handle upward until a light snap is heard and the "ledge" of the handle is over the lip of the cup.
    provale-cup-handle-options
    ONCE ATTACHED, DO NOT REMOVE HANDLES. REMOVING HANDLES COULD DAMAGE THE CUP.

     

    Assembling the Cup

    Wash all Provale® Cup parts before use.
    • Before use, determine the correct Cup to be used: the 5cc Blue Cup or the 10cc Brown Cup.
    BEFORE ASSEMBLY AND FOR CORRECT DELIVERY, CONFIRM THAT THE INNER AND OUTER CUP PARTS ARE THE SAME COLOR: BLUE FOR 5CC AND BROWN FOR 10 CC.
    • There are three cup parts to assemble:
      - lid (top)
      - mid cup
      - outer cup
    • Assemble the mid cup and the lid (top) and snap them together; an audible "click" should be heard. These parts can only be assembled one way.
    • Place the outer cup on a flat surface.
    • When adding thin liquid to be delivered, fill the outer cup to or below the fill line located on the inside of the outer cup. Do not overfill or the cup may leak. The fill line is approximately eight (8) ounces.
    • Place the mid cup/lid (top) assembly into the outer cup and press down on the edges of the assembly. A slight audible "click" should be heard.
    • The Cup is ready to be used.
    Customers who bought this item also bought

    Drive M3 Wheelchair Quick Release Treaded Tire and Accessories **NATIONAL CONTRACT 36C10G23D0020**

    **NATIONAL CONTRACT 36C10G23D0020**

    Built-in seat extensions, custom fitting, easily adjust seat depth from 16" to 18"

    Maintenance-free composite mag-style wheels

    Durable and reliable

    Carbon steel frame with silver vein finish

    Comfortable seat

    M3 Accessories Include: Wheel Brake Lock Extension, Elevated Leg Rest ELRs, Crutch Cane Holder, Oxygen Cylinder Tank Carrier, Brake Assembly Left, Brake Assembly Right Shipping for wheelchair is included in the price. CANNOT SHIP TO A P.O. BOX For expedited or overnight orders, please call 888-505-3627

    Bilt Rite Cervical Pillow Roll Foam 16" X 6' Diameter- White

    Comfortable contour designed cervical pillow made of foam with cotton/polyester cover

    Good Grips Weighted & Bendable Utensils

    (Fork, Rocker Knife, Souper Spoon, Tablespoon, Teaspoon, Set of All 5)

    Kennedy Cup and Replacment Lids

    Perfect when sitting or reclining. Easy-to-grip handle can be picked up by those with weak grasp. Lid screws on tightly to prevent spills or leaks.