ShowerBuddy Parts & Accessories

Shop here for shower buddy parts and accessories.

Showerbuddy Parts

Accessories *

Custom Bridge for ShowerBuddy

The Custom Size Bridge solves this with a bespoke length solution that can be ordered at the same time as select Showerbuddy units. Simply contact your local Solutions consultant with specific requirements of your transfer bridge. The standard transfer bridge can be shortened or lengthened by an additional 900mm on all models, helping to bring all the function of Showerbuddy into more bathrooms. Custom size Bridge is not cancellable or returnable.

Choose Type *

Custom Cushion

Please select this sku and submit attached order form to customer service to place an order for the custom showerbuddy cushion.

Product #: 236518561SB

Overview
Custom Cushion
Custom Bridge

Straight Push Handle: This straight push handle will eliminate 4"s off the footprint of the SB1, SB2 and SB2t. Most commonly used for the SB1 for 360º rotation in smaller shower stalls.
Chest Belt & Lap Belt
- Standard Lap Belt for SB1, SB2, SB2t and SB3t units
- Standard Chest Belt for SB1, SB2, SB2t and SB3t units
Neckrest Attachment
- Includes: 1 x Neck Rest Handle (Part 74)
- NOTE: This part does not need Neck Rest Sleeve part #73
Redirectional/Stabilizer
- This product is needed when a tub unit is used in a shower stall large enough to hold an SB2/SB2t that has no tub walls for the stabilizers
- This accessory redirects the tub supports on the SB2 and SB2t tub base to the front and back wall as opposed to the traditional side to side stabilization.
- This product is also used to further stabilize an SB1 shower base. This unit clamps onto the shower base legs and hold it in position when transferring and showering.
- Note that this is not permanently installed and can easily be removed.
SB Leg Adductor With Pad (Each)
- ShowerBuddy leg adductor supports.
- Provide contoured, personalized positioning for the front, back, and trunk
- They reduce leaning and improve posture.
- These are applied directly on each side of the shower chair in order to safely secure the user from falling off either end of the chair.
- Hardware included
Front Caster Leg (SB6): includes:1x front leg and 1x caster
Caster 4", Locking, (SB6): 1x caster with locking mechanism
Clip on Calf Strap: For Use With: SB2, SB2T, SB3T, SB6c, & SB6W. NOT FOR SB1
Caster Height Adjustment Tube: Sold individually, Compatible with SB1
Footrests: Left and Right sold separatel, Compatible with SB2T & SB3T
Tensioned Backrest: has three separate adjustment straps. Compatible with SB1, SB2, SB2T, and SB3T
Laterals: ShowerBuddy right side lateral
- Compatible with SB1, SB2, SB2T and SB3T
- Pad is not included. (Needs to be purchased separately)
Lateral Pads: Sold individually, 3.5"-3"W x 5.6"L x .75"
6" Shower Base Risers: Only compatible with SB1, comes in set of 4
8" Shower Base Risers: Only Compatible with SB1, comes in set of 4
Channel Armrest: Sold individually, add quantity of 2 for a pair
- Compatible with SB1, SB2, SB2T, SB3T

Cushions have been consolidated into 1 custom cushion option. Please fill out attached order form in custom cushion tab below.

Please use the order form to order desired cushion for designated Shower Buddy System
Open here
Item is not returnable or cancelable
These are made to order. Please allow a 6-week lead time.

Custom size Bridge is not cancellable or returnable
Includes: 2 x Bridge Tongue (Long) (Part 44) 2 x Bridge Tongue (Short) (Part 45) 4 x Latch (Part 46)
For Use With SB2 and SB2T

Straight Push Handle: This straight push handle will eliminate 4"s off the footprint of the SB1, SB2 and SB2t. Most commonly used for the SB1 for 360º rotation in smaller shower stalls.
Chest Belt & Lap Belt
- Standard Lap Belt for SB1, SB2, SB2t and SB3t units
- Standard Chest Belt for SB1, SB2, SB2t and SB3t units
Neckrest Attachment
- Includes: 1 x Neck Rest Handle (Part 74)
- NOTE: This part does not need Neck Rest Sleeve part #73
Redirectional/Stabilizer
- This product is needed when a tub unit is used in a shower stall large enough to hold an SB2/SB2t that has no tub walls for the stabilizers
- This accessory redirects the tub supports on the SB2 and SB2t tub base to the front and back wall as opposed to the traditional side to side stabilization.
- This product is also used to further stabilize an SB1 shower base. This unit clamps onto the shower base legs and hold it in position when transferring and showering.
- Note that this is not permanently installed and can easily be removed.
SB Leg Adductor With Pad (Each)
- ShowerBuddy leg adductor supports.
- Provide contoured, personalized positioning for the front, back, and trunk
- They reduce leaning and improve posture.
- These are applied directly on each side of the shower chair in order to safely secure the user from falling off either end of the chair.
- Hardware included
Front Caster Leg (SB6): includes:1x front leg and 1x caster
Caster 4", Locking, (SB6): 1x caster with locking mechanism
Clip on Calf Strap: For Use With: SB2, SB2T, SB3T, SB6c, & SB6W. NOT FOR SB1
Caster Height Adjustment Tube: Sold individually, Compatible with SB1
Footrests: Left and Right sold separatel, Compatible with SB2T & SB3T
Tensioned Backrest: has three separate adjustment straps. Compatible with SB1, SB2, SB2T, and SB3T
Laterals: ShowerBuddy right side lateral
- Compatible with SB1, SB2, SB2T and SB3T
- Pad is not included. (Needs to be purchased separately)
Lateral Pads: Sold individually, 3.5"-3"W x 5.6"L x .75"
6" Shower Base Risers: Only compatible with SB1, comes in set of 4
8" Shower Base Risers: Only Compatible with SB1, comes in set of 4
Channel Armrest: Sold individually, add quantity of 2 for a pair
- Compatible with SB1, SB2, SB2T, SB3T

Cushions have been consolidated into 1 custom cushion option. Please fill out attached order form in custom cushion tab below.

ShowerBuddy Parts & Accessories

ShowerBuddy Systems

Create Personal Supply List