- Deluxe Bed Sensor Pad 20" x 30" is suggested to be placed under the fitted sheet, 30 inches across the bed, between the shoulder blades and hips. Plug the cord from sensor pad into the bed alarm monitor. The bed alarm monitor will sound a soft beep when pressure is first applied to the sensor pad to let the caregiver know the system is active. When pressure is removed from the sensor pad, the monitor will sound continuous until the caregiver presses the reset button or pressure is reapplied to the sensor pad. The sensor pad is made of a soft vinyl, incontinence resistant and easy to wipe clean.
Bed Alarm Sensor Pads are placed under the resident on the bed. When resident gets up and pressure is released from the pad the bed alarm monitor will sound. (Monitor Required)
Works with all Smart Caregiver Fall Prevention Exit Alarm Monitors.
- Unique SafeTRelease™ cord guaranteed for life of pad
- No more replacing sensor pads due to broken cords (cords can be replaced if broken)
- Unique SafeTRelease™ Cord separates instead of breaking or pulling cord away from pad
- Safety: Reduces tripping, entanglement and choking hazards
2. The Economy Fall Monitor is a low cost option for fall monitoring with a convenient on and off switch for easy reset.
Cord Protection - Safe Release cord reducing trip and entanglement hazards and strain relief on monitor reduces cord damage
Simple to Use and Easy to Set up
Bed Sensor Pad has a 1 year pad life
Requires 1 - 9v battery (not included)
The Economy Fall Guard Monitor System automatically resets when pressure is applied to the bed sensor pad and alarms to alert the caregiver when the resident is getting up. This monitor has an On/Off switch allows only the caregiver to reset the monitor. Additional features include "Pad Lost" light-lets caregivers know if the pad has become disconnected; "Low Battery" light; multiple alarm tones; full volume control.
3. The FallGuard Safety Auto-Reset Systems keep residents safe, while ensuring that patients cannot tamper with the controls or change the settings. There is no on/off switch - the Medical Alarm monitors components and sounds an alert if that component is activated, indicating that the resident has fallen or is on the move. Alerts caregiver if resident falls or gets up to wander
- Visual and audible alarm at monitor when component is triggered
- System is always on, cannot be tampered with or turned off
- Simple reset button allows caregiver to quickly restart system
- TamperProof Caregiver Key controls access to Reset button
- 0-2 second alarm delay to allow repositioning without triggering alarm
- Choice of alarm tone
- Volume control
- Status light blinks while system is operational
- Low battery and pad lost warning lights
- Powered by (3) AA batteries (not included) or optional AC adapter
The TL-2100S has a single control, a reset button that allows a caregiver to quickly restart the system. This button can be locked in Caregiver Key Mode, restricting restart access to caregivers with a specialized key. A blinking status light around the button indicates that the TL-2100S Monitor is working. Two secondary lights warn of low battery and of a damaged or disconnected component. Settings on the back include a volume control, a tone control, and a 0-2 alarm delay, allowing residents to reposition on bed and chair pads without setting off the alarm.
There are a number of alarm components available with the Alarm Monitor Systems. Bed and Chair Pads monitor the pressure of the resident sitting on them and alarm if the resident gets up to leave. If the resident returns their weight to the Alarm Pad, then the alarm will automatically reset. Chair Pads feature coiled cords to prevent entanglement.
Pad is placed under the resident on the seat of the chair. When resident gets up and pressure is released from the pad the monitor will alarm. Works with all Smart Caregiver Fall Prevention Exit Alarm Monitors (Monitor Required).
| Monitor Dimensions | 1" x 3.5" x 4.5" (2.54 x 8.9 x 11.43 cm) DxWxH |
| Monitor Power | (3) AA Batteries (not included) |
| Chair Pad Dimensions | 10" x 15" LxW |
| Pad / Belt Size | 10" x 15" LxW |
4. Standard Alarm Monitor & 10" x 30" Bed Pad, 1-Year -
Protective boot extends alarm life and reduces resident tampering.
LED light and audible chirp alerts caregivers when battery is near expiration. On/Off switch can disable all functionality to preserve battery life. Two volume options for greater versatility.
5. Corded Floor Mat with Alarm Monitor
Simply plug the cord from the floor mat into the exit alarm which you place nearby. When the floor mat is stepped on, the alarm will sound, alerting you that a resident needs assistance.
To silence the alert, press the reset button on the front of the alarm monitor.
Features:
- Great for bedsides and doorways.
- Heavy duty, industrial weight mat with non-slip grip and beveled edges.
- SafeTRelease Cord separates under excessive tension, reducing tripping and entanglement hazards.
- Tamper proof setting when enabled, requires use of patented, caregiver key to reset alarm and only the caregiver can turn monitor off alarm
- Battery operated (3AA - not included) or optional ac adapter
- Includes low battery and monitor status indicator lights
- 3-way adjustable alarm tone / fully adjustable volume control / 0,1,2 second delay control
- Includes: Corded Floor Mat 24" x 36" and Alarm Monitor
