Close
All Categories
    Filters
    Preferences
    Search Results

    Articulating Arm Trough

    *
    *

    The Flat Articulating Arm Trough supports the arm with a flat pressure-redistributing pad which can be removed for cleaning. The part of the device that faces inward toward the seating area also has a removable pad which is 1" thick. The arm trough rotates 90 degrees internally and can travel forward 6 inches to extend the arm rest length. It has three swivel locations in 2-inch increments and is held in place or adjusted by tightening or loosening knobs on the bottom.

    Arm trough pad measurements:

    • 2" thick in the center
    • 3" thick on the edge
    • 8" wide x 16" long

    Hip pad measurement:

    • 1" thick x 8" high x 12" long

     

    You must select which ARM SIDE this device will be installed on. Because of the way the hardwarwe is attached the device is NOT AMBIDEXTROUS (A 212-R is shown as the default product image).

    Hardware to mount the device over a standard wheelchair armrest is included.

     

    The Elevated Articulating Arm Trough rotates 90 degrees internally and can travel forward 6 inches to extend the arm rest length. It has three swivel locations in 2-inch increments and is held in place or adjusted by tightening or loosening knobs on the bottom.

    You must select which ARM SIDE this device will be installed on. Because of the way the hardwarwe is attached the device is NOT AMBIDEXTROUS (A 211-R is shown as the default product image).

    Hardware to mount the device over a standard wheelchair armrest is included

     

    Arm Troughs are excellent for individuals with flaccid arms or for individuals who need to support themselves by leaning on their elbows. In either case, the device is designed to redistribute any increased pressure by the lamination of Visco Elastic. Thisdevice is attached with a static tray that slips over the arm rest.

    As with all of JDM’s devices, these Arm Troughs are covered with a medical grade fabric, which is an incontinent proof, antibacterial, anti-fungal, self-deodorizing,and stain-resistant material.

    You must select which ARM SIDE this device will be installed on. Because of the way the hardwarwe is attached the device is NOT AMBIDEXTROUS.

    Hardware to mount the device over a standard wheelchair armrest is included. There are several other variations of standard arm rest available if this configuration does not suit your needs. If none of our standard items will work for you then call us and we can make a special order.

    Write your own review
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *

    The Flat Articulating Arm Trough supports the arm with a flat pressure-redistributing pad which can be removed for cleaning. The part of the device that faces inward toward the seating area also has a removable pad which is 1" thick. The arm trough rotates 90 degrees internally and can travel forward 6 inches to extend the arm rest length. It has three swivel locations in 2-inch increments and is held in place or adjusted by tightening or loosening knobs on the bottom.

    Arm trough pad measurements:

    • 2" thick in the center
    • 3" thick on the edge
    • 8" wide x 16" long

    Hip pad measurement:

    • 1" thick x 8" high x 12" long

     

    You must select which ARM SIDE this device will be installed on. Because of the way the hardwarwe is attached the device is NOT AMBIDEXTROUS (A 212-R is shown as the default product image).

    Hardware to mount the device over a standard wheelchair armrest is included.

     

    The Elevated Articulating Arm Trough rotates 90 degrees internally and can travel forward 6 inches to extend the arm rest length. It has three swivel locations in 2-inch increments and is held in place or adjusted by tightening or loosening knobs on the bottom.

    You must select which ARM SIDE this device will be installed on. Because of the way the hardwarwe is attached the device is NOT AMBIDEXTROUS (A 211-R is shown as the default product image).

    Hardware to mount the device over a standard wheelchair armrest is included

     

    Arm Troughs are excellent for individuals with flaccid arms or for individuals who need to support themselves by leaning on their elbows. In either case, the device is designed to redistribute any increased pressure by the lamination of Visco Elastic. Thisdevice is attached with a static tray that slips over the arm rest.

    As with all of JDM’s devices, these Arm Troughs are covered with a medical grade fabric, which is an incontinent proof, antibacterial, anti-fungal, self-deodorizing,and stain-resistant material.

    You must select which ARM SIDE this device will be installed on. Because of the way the hardwarwe is attached the device is NOT AMBIDEXTROUS.

    Hardware to mount the device over a standard wheelchair armrest is included. There are several other variations of standard arm rest available if this configuration does not suit your needs. If none of our standard items will work for you then call us and we can make a special order.