1/8" (3.2mm) Perforated, 18" x 24" Beige

Resistance to Stretch

• Moderate resistance to stretch.
• Tolerates minimum to moderate handling during splint molding.
• Handle on a horizontal plane to form splint in a gravity-assisted position or vertical plane as well.
• Smooth motions yield sculpted results.

Drape

• Moderate drape requires only light to moderate pressure to form contour fit.

Memory

• Minimum to moderate memory.
• Splints can be reheated and edges will remain smooth and closed.
• Splints will hold its shape when mildly heated.

Rigidity

• Moderate degree of rigidity.

Bonding

• The traditional coating allows splinting over bandages without adherence.
• A pressed, wet bond will hold firmly but can be pulled apart when cooled.
• Dry heating two surfaces will form a strong bond.
• For a permanent bond, use solvent or scrape off coating, dry heat and press together.

Surface Finish

• Moderate resistance to fingerprints and resists showing stains. To remove marks, lightly heat the surface and rub.
• Smooth, self-sealing cut edges remain sealed even after reheating.

Applications

• 1/8" Vanilla™ can be used for almost all splinting application.
• 3/32" Vanilla™ is thin and lightweight, yet strong, and can be used for finger and hand splints.

Working time (1/8")

• Allows three to five minutes to form and harden after softening in 160° F (71° C) water.

Latex Free